Vaporesso Xros 3 Mini Kit, 16W, Integrated 1000mAh Battery, MTL pod kit - Vape Starter Kit, Vaping, Ecigarette, Ecig - No Nicotine, 2ml TPD Version. (Black), 1.0 count

Product Information

The XROS 3 MINI is like a smaller, more simple XROS 3. The size is great if you’re after something that is as portable as can be, and the design and build quality are top-notch. It’s just a really nicely designed and well-built device and I can see it lasting for a long time if you take care of it. Identical to the XROS 3, the battery level was displayed through different coloured LED lights on the base of the device.

Like the XROS 3 that I reviewed, the XROS 3 MINI has a premium look and feel. The XROS 3 MINI is technically the XROS 2 MINI, because VAPORESSO never released a XROS 2 MINI. For that reason, there’s only the original XROS MINI to compare with, so don’t be confused when I’m making these comparisons. One of the best features of the Vaporesso XROS 3 Mini is that you can refill the pod without removing it from the device. Open the pod by wiggling the mouthpiece gently until it comes off. Place the tip of your vape juice bottle in the filling hole, which is offset from the pod’s center air path. Add e-liquid until the pod is almost full and replace the mouthpiece. If you’re filling a new pod for the first time, don’t start vaping until you’ve waited at least five minutes for the e-liquid to absorb into the coil. How to Vape with the Vaporesso XROS 3 Mini The 2ml Xros pod is easily topped up via the filling port located underneath the mouthpiece. If the 1.2 Ohm coil is installed, your kit will produce an inhale that's closer to the feel of a cigarette. However, if you prefer a little more vapour production, we'd suggest the 0.8 Ohm coil, which can be bought separately. Conveniently, there's a huge range of high PG and 50/50 e-liquids available, all of which are compatible with the Xros Mini. Contains:

I got a very quiet, turbulence free vape and cloud production was great for a MTL vape. Restrictive Lung vaping The XROS 3 is released alongside its baby sibling the XROS 3 Mini. Both devices are pretty much the same on specs but the XROS 3 Mini comes in around 15mm shorter.

In this review, I’ll go over the design, build quality, performance, and battery life of the XROS 3 MINI. I’ll also compare the XROS 3 MINI (which is really the XROS 2 MINI) to the original XROS MINI. There are a total of give pods available for the XROS 3 MINI and they come in a range of resistances. The available pods are: All Vaporesso XROS pods are leak resistant and top filling. You can refill the pod without removing it from the device. I feel like this kit could suit just about any vaper out there, but particularly new vapers and smokers looking to make the switch. The pods attach either way round inside the battery section via two strong magnets. You’ll be pleased to know they pass the drop test.CALIFORNIA PROPOSITION 65 - Warning: This product can expose you to chemicals including formaldehyde and acetaldehyde which known to the State of California to cause cancer, and Nicotine, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov The Vaporesso XROS 3 is another very stylish yet simple pod kit. It’s portable and extremely easy to use. This means it’s accessible not only to a new vaper but also those seasoned to the ways of the vape!

With inhale activation technology, there are no buttons or menus to contend with. All you have to do is puff on the mouthpiece, which will create a moderate amount of vapour for an RDTL style vape that has a tighter draw feeling. You can also find MTL (Mouth To Lung) style XROS pods which are all available from the Vaporesso XROS range, if you prefer a more discreet amount of vapour. Compared with the original XROS MINI it’s still the same size and shape, but there are little differences that add up which make it apparent that this is the next generation of the series. It’s sort of like with cars; you can still tell it’s the same model, but the little changes look fresh and tell you with just a glance that this is the newer version. Fast type C charging was also as promised, in fact coming in at 55 minutes to be precise. My only concern was that the Red LED remained solid for around 15 minutes before slowly pulsing. But it didn’t take long to pass from a pulsing Blue to a solid Green.The LED also alerts for various battery issues including short circuit, low resistance and over vaping. It will react when the pod is inserted or removed too. The Pod Section A Type C USB charging port is provided on the bottom of the battery section. As always, I would recommend removing the filled pod and standing in a vertical position. This will prevent one side of the cotton potentially drying. As for the device; the auto-draw performed perfectly and fired instantly, the slim body was comfortable to hold and the mouthpiece size was spot on.I simply never used the fire button other than to turn it off.The battery life was excellent even with the 0.6ohm pod and I got a full day and into the evening with it, I got over 24 hours with the 1.0ohm pod.The charging time was decent but not the fastest, it took around 50 minutes on average.